Complete Protection
A dense woven construction placed between the finished surface and everything that happens above it — foot traffic, tools, materials and debris — through the active stages of the project.
TECHWEAVE Surface Protection Series
Temporary floor protection built for the jobsite.
A woven technical textile developed for temporary protection of finished floors and surfaces — light to handle, resistant to jobsite wear, waterproof and breathable, and marked with an integrated measurement grid for fast layout and cutting.
- Construction
Woven technical PP/PE
- Grades
Three — standard to heavy duty
- Roll width
38 in (0.97 m)
- Roll length
100 ft (30.48 m)
- Barrier
Waterproof & breathable
- Reuse
Reusable
UP TO 52% 
LIGHTER
Than paper-based protection.*
UP TO 92% 
MORE COVERAGE
Per pound of material.*
3 
PROTECTION GRADES
To match different jobsite demands.
*Compared to conventional paper-based temporary floor protection under equivalent jobsite conditions.
Overview
What is TECHWEAVE Surface Protection?
TECHWEAVE Surface Protection is a professional temporary protection material designed to help safeguard finished floors and surfaces during construction, renovation, maintenance and project completion.
Its engineered woven construction is designed around practical handling, protection and reuse requirements — a material intended to be laid down quickly, worked over, and removed cleanly when the job is done.
Key Features
Six things the material is designed to do.
Waterproof & Breathable
The engineered construction is designed to resist liquid ingress from spills and site activity while still allowing moisture vapour to pass, so protection does not trap it against the surface.
Integrated Measurement Grid
Printed grid lines and rule markings run across the material so layout, measuring and cutting can be handled on the floor without additional marking out.
Anti-Slip Surface
A textured, matte upper face is intended to provide secure footing for the crews working over it in active jobsite conditions.
Tear Resistant
Woven technical tapes give the material practical resistance to the pulling, dragging and repositioning that happens on a working site.
Lightweight & Reusable
Light enough for one person to carry, roll out and reposition — and built to be lifted, stored and reused on the next area or the next project.
Integrated Measurement Grid
Marked out before you start.
Grid lines and rule markings are printed into the material at a practical spacing, so the floor itself becomes the reference.
Alignment
Measuring
Cutting
Layout
Product Grades
Three grades. One material philosophy.
Every grade shares the same woven construction, waterproof and breathable barrier, anti-slip face and integrated measurement grid. What changes is how much punishment the material is built to absorb.
Standard Protection
Light-duty protection for final stages.
Lightest handling of the three grades
Fast to roll out and lift again
Waterproof, breathable and anti-slip
Enhanced Protection
The general-purpose site grade.
Balanced protection, weight and handling
Tear resistant under repositioning and dragging
Reusable across multiple areas of the same project
Heavy-Duty Protection
Maximum protection for punishing routes.
Densest woven construction in the series
Built for loaded wheels and repeated abrasion
Highest resistance to puncture and tearing
TECHWEAVE vs Conventional Protection
How it compares.
Measured against the materials commonly used on site — cardboard and corrugated board, felt-backed rolls and thin plastic sheeting.
| Criteria | TECHWEAVE | Conventional materials |
|---|---|---|
| Construction | Engineered woven PP/PE technical textile | Corrugated board, felt or thin plastic film |
| Water handling | Waterproof barrier that still breathes | Absorbs liquid, or traps moisture against the surface |
| Layout & cutting | Integrated measurement grid printed into the material | No markings — measured and marked out by hand |
| Underfoot safety | Textured anti-slip upper face | Slick film surface, or ridges that curl and lift |
| Durability | Tear and abrasion resistant under site traffic | Tears, punctures and needs replacing mid-project |
| Reusability | Reusable | Largely single use |
| Handling | Lightweight rolls one person can carry and reposition | Bulky sheets or heavy rolls needing two people |
| Waste | Fewer replacements across the programme | Repeated replacement and disposal |
Product Format
Available format.
38″ × 100 ft
0.97 m × 30.48 m
3 Grades
Standard, Enhanced and Heavy-Duty Protection — same roll format across the series.
Documentation
Downloads.
PDF Download →
PDF Download →
PDF Download →
Product Sheet
Product overview, grades, formats and applications.
Technical Data Sheet (TDS)
Full material specification and performance data.
Application Instructions
Step-by-step guidance for installation and removal.
Need a document that isn’t here? Ask our team and we will send it across.
Applications
Applications: construction, renovation, remodeling and maintenance.
Jobsite Applications
- Construction and new builds
- Renovation and remodeling
- Maintenance works
- High-traffic jobsite routes
- Pre-handover and final stages
Surface Applications
- Hardwood & Engineered Wood
- Laminate & Vinyl
- LVT / SPC / WPC
- Ceramic & Porcelain Tile
- Sealed Marble & Natural Stone
- Sealed Concrete
- Suitable Countertops
Suitability should be confirmed for the specific substrate and application. Test on a small, inconspicuous area before full application.
How It Is Used
Six steps, start to finish.
-
01
Prepare
Ensure the surface is clean, dry, level and free from debris.
-
02
Apply
Unroll and align the material. Cut as required.
-
03
Secure
Secure edges, seams and overlaps appropriately using suitable tape where required.
-
04
Check
Ensure the material lies flat and remains stable underfoot.
-
05
Use
Monitor the protected area during ongoing work.
-
06
Remove & Reuse
Remove after use, store the material and reuse it on the next area or project.
FAQ
Questions about the product?
Installation, surface suitability, reuse, removal, storage and performance — the questions our team is asked most, answered in one place.
- Does the product have adhesive and how is it installed?
- What surfaces can it be used on?
- Is it waterproof and breathable?
- Is the product reusable?
- Is a flame-retardant (FR) version available?
Product Care
Important use conditions.
Recommended for appropriate interior applications. Suitability should be confirmed for the specific substrate and application.
Test on a small, inconspicuous area before full application. Do not apply to wet, slippery, uneven, dirty or moisture-prone surfaces. Ensure the material is secured during installation to prevent shifting or tripping, and re-fix immediately if movement occurs.
The material is a temporary protection system and is intended to be removed once work is complete. It is not self-adhesive. The material is reusable — keep it clean and dry between uses.